★Juniper NetWorks オンライン SRX340★ファイアウォール★初期化★送料無料★0407-I

  • 商品説明・詳細

  • 送料・お届け

商品情報

※必ず最後までお読み頂き同意の上入札の程お願い致します※ 商品詳細 製品名 Juniper NetWorks SRX340 型番 SRX340 コンソール SPI stage 1 bootloader (Build time: May 3 2016 - 23:48:30)
early_board_init: Board type: SRX_340

U-Boot 2013.07-JNPR-3.1 (Build time: May 03 2016 - 23:48:31)

SRX_340 board revision major:1, minor:7, serial #: CY3816AF0460
OCTEON CN7130-AAP pass 1.2, Core clock: 1200 MHz, IO clock: 600 MHz, DDR clock: 667 MHz (1334 Mhz DDR)
Base DRAM address used by u-boot: 0x10fc00000, size: 0x400000
DRAM: 4 GiB
Clearing DRAM...... done
Using default environment

SF: Detected MX25L6405D with page size 256 Bytes, erase size 64 KiB, total 8 MiB
Found valid SPI bootloader at offset: 0x90000, size: 1481840 bytes


U-Boot 2013.07-JNPR-3.1 (Build time: May 03 2016 - 23:50:19)

Using DRAM size from environment: 4096 MBytes
checkboard siege
SATA0: not available
SATA1: not available
SATA BIST STATUS = 0x0
SRX_340 board revision major:1, minor:7, serial #: CY3816AF0460
OCTEON CN7130-AAP pass 1.2, Core clock: 1200 MHz, IO clock: 600 MHz, DDR clock: 667 MHz (1334 Mhz DDR)
Base DRAM address used by u-boot: 0x10f000000, size: 0x1000000
DRAM: 4 GiB
Clearing DRAM...... done
SF: Detected MX25L6405D with page size 256 Bytes, erase size 64 KiB, total 8 MiB
PCIe: Port 0 link active, 1 lanes, speed gen2
PCIe: Link timeout on port 1, probably the slot is empty
PCIe: Port 2 not in PCIe mode, skipping
Net: octrgmii0
octeon_fdt_broadcom_config: Unknown broadcom phy for octrgmii0
Interface 4 has 1 ports (AGL)
Type the command "usb start" to scan for USB storage devices.

Boot Media: eUSB usb
Found TPM SLB9660 TT 1.2 by Infineon
TPM initialized
Hit any key to stop autoboot: 0
SF: Detected MX25L6405D with page size 256 Bytes, erase size 64 KiB, total 8 MiB
SF: 1048576 bytes @ 0x200000 Read: OK
## Starting application at 0x8f0000a0 ...
Consoles: U-Boot console
Found compatible API, ver. 3.1
USB1:
Starting the controller
USB XHCI 1.00
scanning bus 1 for devices... 2 USB Device(s) found
USB0:
Starting the controller
USB XHCI 1.00
scanning bus 0 for devices... 1 USB Device(s) found
scanning usb for storage devices... 1 Storage Device(s) found

FreeBSD/MIPS U-Boot bootstrap loader, Revision 2.8
([email protected], Tue Feb 10 00:32:30 PST 2015)
Memory: 4096MB
SF: Detected MX25L6405D with page size 256 Bytes, erase size 64 KiB, total 8 MiB
[0]Booting from eUSB slice 1
Loading /boot/defaults/loader.conf
/kernel data=0xb817f4+0x151638 syms=[0x4+0x9de30+0x4+0xeb463]


Hit [Enter] to boot immediately, or space bar for command prompt.
Booting [/kernel]...
Kernel entry at 0x801000c0 ...
init regular console
Primary ICache: Sets 16 Size 128 Asso 39
Primary DCache: Sets 8 Size 128 Asso 32
Secondary DCache: Sets 1024 Size 128 Asso 4
CIU_FUSE 0xf/0xf
GDB: debug ports: uart
GDB: current port: uart
KDB: debugger backends: ddb gdb
KDB: current backend: ddb
kld_map_v: 0x8ff80000, kld_map_p: 0x0
Running in PARTITIONED TLB MODE
Copyright (c) 1996-2016, Juniper Networks, Inc.
All rights reserved.
Copyright (c) 1992-2007 The FreeBSD Project.
Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994
The Regents of the University of California. All rights reserved.
FreeBSD is a registered trademark of The FreeBSD Foundation.
JUNOS 15.1X49-D60.7 #0: 2016-09-13 22:27:47 UTC
builder@svl-junos-p003:/volume/build/junos/15.1/service/15.1X49-D60.7/obj/octeon/junos/bsd/kernels/JSRXNLE/kernel
can"t re-use a leaf (debug)!
JUNOS 15.1X49-D60.7 #0: 2016-09-13 22:27:47 UTC
builder@svl-junos-p003:/volume/build/junos/15.1/service/15.1X49-D60.7/obj/octeon/junos/bsd/kernels/JSRXNLE/kernel
real memory = 4294967296 (4194304K bytes)
avail memory = 2621882368 (2500MB)
FreeBSD/SMP: Multiprocessor System Detected: 4 CPUs
Security policy loaded: JUNOS MAC/runasnonroot (mac_runasnonroot)
Security policy loaded: Junos MAC/veriexec (mac_veriexec)
Security policy loaded: JUNOS MAC/pcap (mac_pcap)
MAC/veriexec fingerprint module loaded: SHA256
MAC/veriexec fingerprint module loaded: SHA1
netisr_init: !debug_mpsafenet, forcing maxthreads from 4 to 1
cpu0 on motherboard
: CAVIUM"s OCTEON 70XX/71XX CPU Rev. 0.2 with no FPU implemented
L1 Cache: I size 78kb(128 line), D size 32kb(128 line), thirty two way.
L2 Cache: Size 512kb, 4 way
obio0 on motherboard
uart0: on obio0
uart0: console (9600,n,8,1)
twsi0 on obio0
set clock 0x58
xhci0: on obio0
usb0: on xhci0
usb0: USB revision 3.0
uhub0: vendor 0x0000 XHCI root hub, class 9/0, rev 3.00/1.00, addr 1
uhub0: 2 ports with 2 removable, self powered
xhci1: on obio0
usb1: on xhci1
usb1: USB revision 3.0
uhub1: vendor 0x0000 XHCI root hub, class 9/0, rev 3.00/1.00, addr 1
uhub1: 2 ports with 2 removable, self powered
cpld0 on obio0
pcib0: on obio0
Disabling Octeon big bar support
pcib0: Initialized controller
pci0: on pcib0
pci0: at device 0.0 (no driver attached)
pci0: at device 0.1 (no driver attached)
gblmem0 on obio0
octpkt0: on obio0
cfi0: on obio0
cfi1: on obio0
octagl0: on obio0
umass0: ATP Electronics ATP CG eUSB, rev 2.00/11.00, addr 2
miibus0: on octagl0
brgphy0: on miibus0
brgphy0: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, 1000baseT, 1000baseT-FDX, auto
Timecounter "mips" frequency 1200000000 Hz quality 0
Registered AMT tunnel Encap with UDP Tunnel!
Loading Redundant LT driver
###PCB Group initialized for udppcbgroup
###PCB Group initialized for tcppcbgroup
Kernel thread "wkupdaemon" (pid 48) exited prematurely.
da0 at umass-sim0 bus 0 target 0 lun 0
da0: Fixed Direct Access SCSI-4 device
da0: 40.000MB/s transfers
da0: 7672MB (15712256 512 byte sectors: 255H 63S/T 978C)
Trying to mount root from ufs:/dev/da0s1a
WARNING: / was not properly dismounted
MFSINIT: Initialising MFSROOT
WARNING: / was not properly dismounted
Process-1 beginning MFSROOT initialization...
Creating MFSROOT...
/dev/md0: 20.0MB (40956 sectors) block size 16384, fragment size 2048
using 4 cylinder groups of 5.00MB, 320 blks, 640 inodes.
super-block backups (for fsck -b #) at:
32, 10272, 20512, 30752
Populating MFSROOT...
Creating symlinks...
Setting up mounts...
Continuing boot from MFSROOT...
Attaching /cf/packages/junos via /dev/mdctl...
Mounted junos package on /dev/md1...
A
WARNING: R/W mount of /cf/var denied. Filesystem is not clean - run fsck
mount: /dev/bo0s3f : Operation not permitted
chflags: /var/packages/*: No such file or directory
umount: /dev/bo0s3f: unknown file system
Automatic reboot in progress...
** /dev/da0s1a (NO WRITE)
** Last Mounted on /
** Root file system
** Phase 1 - Check Blocks and Sizes
** Phase 2 - Check Pathnames
** Phase 3 - Check Connectivity
** Phase 4 - Check Reference Counts
** Phase 5 - Check Cyl groups
159 files, 122040 used, 1142314 free (90 frags, 142778 blocks, 0.0% fragmentation)
mount reload of "/" failed: Operation not supported

Verified junos signed by PackageProductionEc_2016 method ECDSA256+SHA256
Verified jboot signed by PackageProductionEc_2016 method ECDSA256+SHA256
Verified junos-15.1X49-D60.7-domestic signed by PackageProductionEc_2016 method ECDSA256+SHA256
Checking integrity of BSD labels:
s1: Passed
s2: Passed
s3: Passed
s4: Passed
** /dev/bo0s3e
** Last Mounted on /config
** Phase 1 - Check Blocks and Sizes
** Phase 2 - Check Pathnames
** Phase 3 - Check Connectivity
** Phase 4 - Check Reference Counts
** Phase 5 - Check Cyl groups
7 files, 7 used, 94769 free (33 frags, 11842 blocks, 0.0% fragmentation)

***** FILE SYSTEM MARKED CLEAN *****
** /dev/bo0s3f
** Last Mounted on /cf/var
** Phase 1 - Check Blocks and Sizes
** Phase 2 - Check Pathnames
** Phase 3 - Check Connectivity
** Phase 4 - Check Reference Counts
UNREF FILE I=164923 OWNER=0 MODE=100644
SIZE=0 MTIME=Apr 7 07:08 2022
CLEAR? yes

** Phase 5 - Check Cyl groups
FREE BLK COUNT(S) WRONG IN SUPERBLK
SALVAGE? yes

SUMMARY INFORMATION BAD
SALVAGE? yes

BLK(S) MISSING IN BIT MAPS
SALVAGE? yes

447 files, 26702 used, 1082511 free (287 frags, 135278 blocks, 0.0% fragmentation)

***** FILE SYSTEM MARKED CLEAN *****

***** FILE SYSTEM WAS MODIFIED *****
Checking integrity of licenses:
Checking integrity of configuration:
rescue.conf.gz: Passed
Loading configuration ...
hw.re.gres_sync_other: 0 -> 1
mgd: Running FIPS Self-tests
veriexec: no fingerprint for file="/sbin/kats/cannot-exec" fsid=76 fileid=2400460 gen=1 uid=0 pid=850
mgd: FIPTime and ticks drifted too much, resetting synchronization...
Network security daemon:
Network security daemon: nsd
Network security daemon: Interfaces are changed from no mode to switch mode. L2 global mode is changed from transparent mode to switching mode. Please use the command request system reboot on current node or all nodes in case of HA cluster!
Network security daemon:
Non-existant dump device /dev/bo0s1b
mgd: commit complete
ln: /var/chroot/rest-api/web-api: Read-only file system
Setting initial options: .
Starting optional daemons: usbd.
Doing initial network setup:
.
Initial interface configuration:
additional daemons: eventd.
Non-existant dump device /dev/bo0s1b
hw.re.gres_sync_other: 1 -> 0
Additional routing options:kern.module_path: /boot//kernel;/boot/modules -> /boot/modules;/modules/ifpfe_drv;/modules;
kld netpfe drv: ifpfed_dialer ipsecIPsec: Initialized Security Association Processing.
kld kats kl.
Doing additional network setup:.
Starting final network daemons:.
setting ldconfig path: /usr/lib /opt/lib
starting standard daemons: cron.
Initial rc.mips initialization:.
Local package initialization:.
starting local daemons:set cores for group access
.
kern.securelevel: -1 -> 1
Creating JAIL MFS partition...
JAIL MFS partition created
Boot media /dev/da0 has dual root support
** /dev/da0s2a
FILE SYSTEM CLEAN; SKIPPING CHECKS
clean, 1146331 free (59 frags, 143284 blocks, 0.0% fragmentation)
chassis.ko loaded Loading JUNOS chassis module
chassis_init_hw_chassis_startup_time: chassis startup time 0.000000
Thu Apr 7 07:23:36 UTC 2022
AAAAAAAAAAAAAA
Amnesiac (ttyu0)

login: root

--- JUNOS 15.1X49-D60.7 built 2016-09-13 22:27:47 UTC
% cli
root> show version
Model: srx340
Junos: 15.1X49-D60.7
JUNOS Software Release [15.1X49-D60.7]

root> show chassis hardware
Hardware inventory:
Item Version Part number Serial number Description
Chassis CY3816AF0460 SRX340
Routing Engine REV 0x07 650-065043 CY3816AF0460 RE-SRX340
FPC 0 FPC
Power Supply 0

root> show system license installed

Licenses installed: none

root> show chassis routing-engine
Routing Engine status:
Temperature 27 degrees C / 80 degrees F
CPU temperature 49 degrees C / 120 degrees F
Total memory 4096 MB Max 2662 MB used ( 65 percent)
Control plane memory 2624 MB Max 2099 MB used ( 80 percent)
Data plane memory 1472 MB Max 559 MB used ( 38 percent)
5 sec CPU utilization:
User 35 percent
Background 0 percent
Kernel 26 percent
Interrupt 0 percent
Idle 39 percent
Model RE-SRX340
Serial ID CY3816AF0460
Start time 2022-04-07 07:20:20 UTC
Uptime 4 minutes, 32 seconds
Last reboot reason 0x1:power cycle/failure
Load averages: 1 minute 5 minute 15 minute
6.64 2.80 1.15

root> show chassis fpc pic-status
Slot 0 Online FPC
PIC 0 Online 8xGE,8xGE SFP Base PIC

root> 外観 ポートチェック等は行っていません。 付属品 特に有りません。
初期動作保証 商品到着後7日間以内、返品又は、同じ物が有れば交換可 その他記載事項 CO2排出削減値 本商品をご使用いただくことにより削減されるCO2は、約113kgとなります。
(当社調べ) 弊社管理番号
営業日について ●土日祝日は弊社休業の為、一切の業務を停止しております。(定休日:土日、祝日、弊社指定休日)
お問合せの際は、弊社営業時間内にお願い致します。

※平日10時〜12時、13時〜17時の間での対応とさせて頂いております。
領収書発行について ●領収書発行希望の方は、オーダーフォーム入力時にご要望欄にご入力ください。
商品発送後のお申し出についてはお受けできない場合がございます。
※宛名と但し書きのご要望がある場合は事前にご入力ください。
※無記名での発行は致しかねます。

なお便の場合は、収納業者である運送会社の送り状控えが、
正式な領収書となりますので、当店からの発行は致しかねます。
お取引の流れについて ●取引後の流れについて
(1)落札後ヤフーより自動配信されるメールからオーダーフォームへのご入力をお願い致します。

(2)ご決済をお願い致します。※送料未確定の場合を除く

(3)当店にてご入金確認→3営業日以内に出荷→出荷後にご連絡。

(4)ストア出品となりますので、受取連絡は不要です。
※商品到着次第お取引終了となります。 送料・

残り 3 50,000円

(257 ポイント還元!)

翌日お届け可(営業日のみ) ※一部地域を除く

お届け日: 12月30日〜指定可 (明日9:00のご注文まで)

  • ラッピング
    ラッピング
希望しない
希望する ( +600円 )
希望しない
数量
同時に5点までのご購入が可能です。
お気に入りに保存

対応決済方法

クレジットカード
クレジットカード決済
コンビニ前払い決済
コンビニ決済
代金引換
商品到着と引き換えにお支払いいただけます。 (送料を含む合計金額が¥298,961 まで対応可能)
ペイジー前払い決済(ATM/ネットバンキング)
以下の金融機関のATM/ネットバンクからお支払い頂けます
みずほ銀行 、 三菱UFJ銀行 、 三井住友銀行
りそな銀行 、ゆうちょ銀行、各地方銀行
Amazon Pay(Amazonアカウントでお支払い)

大量注文に関して

30個以上かつ10万円以上のご購入はこちらからお問い合わせください

お問い合わせはこちらから